WACO 211 Can End Panel Holder | Cable Adapter/Foot Switch NEEDED

$890.00

Can Inspection, WACO, End Panel Holder

WACO 211 Can End Panel Holder | Cable Adapter/Foot Switch NEEDED

Description

The WACO End Panel Holder [PN: T-14-159] can be used with any WACO Enamel Rater to test for metal exposure on can ends. The End Panel Holder is attached to the Enamel Rater electronics console. Cable adapter/foot switch is required to use the End Panel Holder with the Enamel Rater. Other sizes available. Please check below for more information.

The test is performed in the same manner as on a can. Electrolyte is added to the plastic cup, the can end is fitted onto the beveled end of the cup, and a vacuum is applied to hold the end securely on the cup.

When the cup is inverted, the electrode and can end become immersed in the electrolyte and the reading is displayed on the Enamel Rater.
The WACO End Panel Holder consists of a Lucite cup mounted to rotate on its horizontal axis. The cup is beveled to make a tight seal on the can end. An electrode and vacuum connection are mounted within the cup. On the Bakelite base a vacuum stopcock and a moveable contact arm, which completes the electrical circuit when the assembly is inverted.

PLEASE NOTE: A cable adaptor footswitch [T-14-168] is required to connect a WACO End Panel Holder to the WACO Digital Enamel Rater III.

Terriss Related Products:
  • T-14-154 | WACO End Panel Holder, 200 can
  • T-14-155 | WACO End Panel Holder, 202 can
  • T-14-157 | WACO End Panel Holder, 206 can
  • T-14-158 | WACO End Panel Holder, 209 can
  • T-14-159 | WACO End Panel Holder, 211 can
  • T-14-168 | N/S Cable Adapter/Foot Switch

For further questions or inquiries about our products, please Contact Us.

Weight 5 lbs
Dimensions 15 × 15 × 15 in
Shopping Cart
WACO 211 Can End Panel Holder | Cable Adapter/Foot Switch NEEDEDWACO 211 Can End Panel Holder | Cable Adapter/Foot Switch NEEDED
$890.00