Light Duty Bottle Crowner | Hand/Manual
Description
The Terriss Light Duty Bottle Crowner (PN: T-18-110) is for capping bottles by hand. The body is made primarily of plastic, and it is lightweight for easy maneuverability, while also being durable for usage just about anywhere. The cup ID is 1.1″.
The height is adjustable for any size bottle and works best when placed atop a flat surface. Simply adjust the height for the bottle, place the steel crown, and then pull down with the handle – a straightforward finish to bottling beverages.
Features
- PN: T-18-110
- Lightweight, plastic body
- Height adjustable for various bottles
- Straightforward and easy to use
- Cup ID is 1.1″
How to Use
- Preparatory Stage:
- Place the bottle correctly on the stand.
- Apply the crown cap to the magnet inside the crimping cup “A.”
- Capping:
- Hold the unit “C” to easily push the black button “D” with the thumb.
- Press deeply the “D” button and at the same time depress the unit “C” until the crimping cup “A” is set on the bottle.
- To cap the bottle, depress the level “B,” first slowly (so that the gears get blocked inside the most suitable hole) and then to limit stop.
- Note: The inside of the crimping cup should be slightly greased before use. The capper is fitted with a crimping cut for 26mm crown caps. The crimping cut for 29/31mm crown caps is available on request. To easily replace the crimping bring level “B” to position (1). For a better sliding of the capper head, spray the column with silicone occasionally.
