Chlorine Comparator, 5-250 ppm, Total Chlorine
Taylor comparators offer systems for colorimetrically determining solute levels in industrial, natural, and recreational waters. In each test, a liquid sample is treated with reagents causing a color to develop. The treated sample is then placed in the comparator base and compared to the liquid-color standards in the Slide. A color match is made and the concentration of the substance is read from the values on the Slide. The unique Taylor colorimetric system compensates for cloudy or colored samples by using three cells. Two untreated samples are positioned on both sides of the treated sample, providing a more accurate color match.
| Chlorine, Total | Slide comparator | OT | 5, 15, 25, 50, 75, 100, 150, 200, 250 ppm chlorine (Cl₂) | 9231 | 4025 |
Ships Hazardous: Additional hazardous shipping fees apply.
COLOR COMPARISON TEST TOTAL CHLORINE (5-250 ppm) COMPONENTS:
3 x 3267
3 x 4025
1 x 4029
1 x 4030
1 x 5142
1 x 6002
1 x 9189
1 x 9231 Cap, Test Cell (5 mL), plastic Test Cell, Calibrated (5 mL), plastic Pipet, Calibrated (0.5 & 1.0 mL), plastic Pipet, Calibrated (0.5 & 1.0 mL) w/ cap, plastic Instruction Brush, Test Cell Base, Slide Comparator, Enslow (for test cells) Slide Comparator, Chlorine (total), OT, 5-250 ppm
1 x R-0604-C Chlorine Reagent #2*, 2 oz
1 x R-0616-C Hydrochloric Acid Concentrated**, 2 oz
Potential Interference: Other halogens and oxidized manganese may cause positive interference.
REAGENT SHELF LIFE
All reagents have a shelf life, whether they are liquids, powders, crystals, tablets, or test-strip pads. If kept dry, powders and crystals are very stable; acids are also long lived. Date of manufacture is not the controlling factor when it comes to shelf life—storage conditions are more important. As with all perishables, reagents are sensitive to environmental influences and will last longer under controlled conditions.
To this end, we recommend:
- Storing reagents at a consistent temperature in the range if 36°–85°F (2°–29°C); extreme temperature fluctuation, say from a refrigerator to a hot car trunk, causes reagents to deteriorate.
- Keeping them out of prolonged direct sunlight. (Note: their brown plastic bottles help protect very light-sensitive reagents.)
- Segregating reagents from containers of treatment chemicals.
- Replacing caps immediately and tightening them carefully so that exposure to air and humidity is limited.
- Avoiding switching bottle caps, placing bottle caps on soiled surfaces, repouring reagents into contaminated containers, or touching test strip pads.
Taylor formulates its reagents to remain effective for at least one year, with only very few exceptions (molybdenum indicator in liquid form is one; after four months old it should be tested against a standard periodically). As a general precaution, replace all reagents more than one year old, or at the beginning of a new testing season.
*WARNING: Chlorine Reagent #2 (R-0604) contains 0.1-5% w/w orthotolidine, a suspected carcinogen, and 0.1-5% w/w hydrochloric acid, an irritant acid.
**WARNING: Hydrochloric Acid Concentrated (R-0616) contains 30-40% w/w hydrochloric acid, a corrosive acid.
