Standard Calibration Solution 30PPM | For Dissolved Solids Meters, Qt

Description

The Standard Calibration Solution 30PPM (PN: T-11-280) is used to calibrate Dissolved Solids Meters and works best with the Myron L. Company devices. The solution contains 30PPM or 47 microhms of concentration. It is the best choice when measuring boiler and cooling water samples, city water supplies, lakes, wells, and so on. It comes in liquid form and is available in quart sized bottles.

“442” refers to the combination of salts mixed with deionized water to comprise this standard: 40% sodium sulfate, 40% sodium bicarbonate, 20% sodium chloride. A combination of standard salts is necessary since natural water salt type and concentration can vary greatly by location. After much research, the 442 Standard was developed by the Myron L Company more than 55 years ago. It remains the world’s most accepted standard.

Features

• PN: T-11-280
• Volume: 1 Quart (945 mL)
• Form: Liquid
• Concentration: 30PPM/47 microhms
• Conductivity Values accurate to within ±1% and are referenced to 25°C
• Used to calibration Myron L. Dissolved Solids Meters
• Standards have NaCl and 442™ conversions included for ease of use

Terriss Related Products:

• T-11-280 | Calibration Solution DS, 30ppm, Qt
• T-11-282 | Calibration Solution DS, 300 ppm, Qt
• T-11-284 | Calibration Solution DS, 3000 ppm, Qt

For further questions or inquiries about our products, please Contact Us.